Example image

Marks on walls should be cleaned/repainted and indistinguishable.

Example image

Floor should not have had dents during inspection and should have been repaired.

Example image

Floor appears to have been damaged when oven was replaced under previous punch-list item. The floor surface including dents should be repaired. This is primarily near the stairs in the foyer and between the stove and the dishwasher.

Example image

Wall and molding in corner should have been repaired.

Example image

Ledge (along with the rest of the unit) was clearly not "broom cleaned" as it should have been. Debris should be removed.

Example image

Ceiling fixture (fan/light); was told this would be installed by 05-19. Applicable switches should also be connected if not already done so.

Example image

Ceiling speakers not cleanly installed.

Example image

Showers/wall joints not sealed properly.

Example image

Marks on walls should be cleaned/repainted and indistinguishable.

Example image

Molding, usually in lower left corners, frequently leaves gaps.

Example image

Speaker was damaged due to improper installation. Each speaker should be installed properly, undamaged, and with a dedicated line--in good condition--dropped into the living room. (When an audio system is connected, each channel functions as would be expected from properly designed and installed audio system.)

Example image

Grille was damaged due to improper speaker installation.

Example image

Light was removed because of code, but holes have not yet been patched.

Example image

Damage to walls was supposed to be fixed/re-painted. This picture is from the area near the unit's door/wall-speakers. Wall across from upstairs room's door needs to be patched; downstairs (foyer/kitchen/nook) and upstairs need to be repainted and patched. Ceiling needs to be touched-up at edges in a way that blends in with existing paint job, or repainted in its entirety with special attention to edges and corners which were previously done poorly.

Example image

Damage to walls was supposed to be fixed/re-painted. This picture is from the area near the unit's door/wall-speakers.

Example image

Damage to walls was supposed to be fixed/re-painted.

Example image

Walls were supposed to be repainted foyer / kitchen / dining areas and upstairs.

Example image

Window panes are cracked and should be replaced. Foyer/porch windows should be closed and latched.

Example image

Window panes are cracked and should be replaced. Foyer/porch windows should be closed and latched.

Example image

Window frames do not all align properly, making some impossible to latch. Frame of left foyer window is cracked. Screens should be properly installed and correctly aligned in runners.

Example image

Molding should be consistent and flush with the floor throughout the unit.

Example image

Molding should be consistent and flush. There should not be gaps in the momlding nor in any seals.

Example image

Lights were moved and walls patched, but not re-painted.

Example image

Middle and right (facing plate) switches should be switched (re-connected) to match down-stairs plate; middle switch should be fan, and right switch should be vanity lights.

Example image

Standard electrical outlet was to be installed in downstairs closet near patch cable panel.

Example image

Light bulbs for upstairs and downstairs bedroom closets were to be provided.

Example image

Apparent guiding holes are left unfilled in the wood. These should at least be filled and blend in with the surrounding surface.

Example image

Walls, upstairs floor, and attached cabinets vibrate mechanically for extended periods of time off-and-on. Most likely caused by sub-optimal mounting of mechanical devices on roof.

Example image

Left handle does not securely attach and is easily pulled-off with normal use. Handle system should be fixed or replaced such that the handle correctly and securely engages in the designed manner.

Example image

Valves and pipes should be labeled. Any design deficiencies should be corrected.

Example image

Switches should be descriptively labeled in distribution board.